Type 66SS Stainless Steel Pressure Filter/Regulator

The Type 66SS Stainless Steel Pressure Filter/Regulator is a direct-acting diaphragm pressure-reducing regulator. This ruggedly built regulator operates in pressure ranges up to 250 psig (17 BAR) with maximum inlet pressure up to 435 psig with a manual drain / 150 psig with an auto drain. The unit is supplied standard with a 25-micron stainless filter. The Type 66SS pressure filter/regulator can be through-panel mounted with the mounting nut supplied or pipe mounted by its ports. The Type 66SS applications include air pressure and industrial or medical gas pressure filtering and regulation. Ideal for when a corrosion-resistant regulator is preferred or required. All material internal as well as the body and bonnet is made from bar stock - 316L stainless steel. Oxygen cleaning is available on the T66SS unit for use in clean environments, gases and medical applications.

• All SS316L stainless steel material
• Four port sizes of 1/4” to 3/4” NPT
• 25μ stainless steel filter standard
• High flow rate 1.3, 1/4” to 6.4, 3/4” CV
• Five pressure ranges between 3 & 250 psig
• Low temp nitrile elastomers -76°F/+176°F

• Medical and bio-medical
• Instrument & sampling panels
• Corrosive and caustic mediums
• Industrial & specialty gas handling
• Pharmaceutical processing equipment
• Food & beverage facilities and equipment