Type 70 - T70 BP High Flow BackPressure Regulator
The Type 70 Back Pressure Regulator functions as a high flow, high precision pneumatic relief valve with an adjustable setpoint. The Type 70BP back pressure regulator can be used in place of a standard relief valve to improve pressure control while maintaining protection against over pressurization, as in supply pressure lines to instruments and other control devices. It is most often used in conjunction with a diaphragm-operated valve and bleed orifice as a compressor controller. Excess compressor pressure is relieved through the back pressure regulator to actuate the intake restricting valve. When the back pressure regulator is shut off, downstream air escapes through the bleed orifice, allowing the restricting valve to open.
Features:- High Flow Capacity – Up to 50 SCFM (1400 LPM)
- Accurate Pressure Controls
- May Be Used in Place of a Standard Relief Valve
- Units Respond Quickly to Minute Upstream Pressure Changes
- Stack-up Construction May Be Disassembled and Service Without Removal from Air Line
- Precision High-Flow Back Pressure Relief
- Precise Control of Paper Machinery Felt Guides
- Pneumatic Clutch Regulation
- Pressure Cylinder Control
- Protection of Instrument and Control Device Supply Pressure Line
vinyl paint
Adjusting Screw: Plated steel
Trim: Plated steel, brass,
acetal resin
Diaphragm: Buna-N with
polyester fabric
Knob: Phenolic plastic
Spring: Music wire
Find Your Part Number
Not sure? Call for help. Phone: 304-387-1200
| Part Number | Description |
|---|
