Type 50- T50 Filter/Dripwell Regulator
Marsh Bellofram’s General Purpose Type 50 and Type 50 NACE Filter Regulators are reliable precision units designed for instrumentation and general purpose use in both standard environments (Type 50), and corrosive environments (Type 50 NACE). The Type 50 NACE complies with NACE material requirement #MR0175 for sulfide stress cracking resistant metallic material for oil field equipment.
Features:- Superior regulation characteristics
- Rugged, corrosion-resistant construction
- Excellent stability and repeatability
- Self-relieving
- Integral, 40 micron, self-cleaning filter
- Low droop at high flow
- Several mounting options
- Meets ATEX II 2 G Dc T 6 (Non-electrical certification)
- Oilfield Equipment (NACE approved version)
- Chemical Processing Plants (NACE approved version)
- Corrosive Industrial Environments (NACE approved version)
- Air Chucks
- Air Spray Guns
- Air Cylinders and Actuators
- Industrial Pneumatic Systems and Equipment
- Pilot-operated Controllers and Instruments
Size
3.19" X 3.19" X 7.25"
Maximum Supply Pressure
250 psig (17.2 BAR)
Pressure Ranges
0-10 psig
0-30 psig
0-60 psig
0-120 psig
0-30 psig
0-60 psig
0-120 psig
Port Sizes
1/4"
Sensitivity
1" Water Column (2.5 cm)
Forward Flow Capacity
20 SCFM (566 LPM)
Exhaust Capacity @ 5 psig (0.4 BAR) above setpoint
0.1–0.45 SCFM Typical (2.8 - 12.7 LPM)
Temperature Range
0-160˚F (-18 to 71˚C)
Total Air Consumption @ Maximum Output
6 SCFH (2.8 LPM)
Materials of Construction
Body: Die cast aluminum with vinyl paint
Adjusting Screw: Plated steel
Trim: Plated Steel, Brass, Acetal Resin
Diaphragm: Buna-N Elastomer and Polyester Fabric
Knob: Phenolic Plastic (option)
Spring: Music wire
Adjusting Screw: Plated steel
Trim: Plated Steel, Brass, Acetal Resin
Diaphragm: Buna-N Elastomer and Polyester Fabric
Knob: Phenolic Plastic (option)
Spring: Music wire
Effect of Supply Pressure Variation on Outlet Pressure
< 0.2 psig (0.01 BAR)
Effect of Changes in Flow on Regulated Pressure
4 psig / 0.3 BAR over flow of 10 SCFM / 283 LPM
(1/4 NPT, 20 psig / 1.4 BAR set point)
(1/4 NPT, 20 psig / 1.4 BAR set point)
Mounting Options
Pipe, Panel, Bracket or Thru Body Holes
Find Your Part Number
Not sure? Call for help. Phone: 304-387-1200
Part Number | Description |
---|